Plastic Pellet Hot Air Dryer Machine Auto Industrial Vacuum Loader Granule Plastic Hopper Dryer

Description: 
CTC series hot air circulating drying machine is made by a low noise, high temperature axial flow fan and automatic temeprature control system. 
The whole circulation system is fully enclosed to make that the heat efficiency of the drying oven increases from 3-7%of the traditional drying oven to 35-45% of the present one. The highest heat efficiency can reach to 50%.

1. For the heating source, there are many kinds: steam, electrical, far infrared or steam and electrical to be chosen.
2. The used temperatures to be used: steam heating 50-140°C, Max.150°C.
3. The moisture while using the electrical or temperature: 50-350°C.
4. There are the automatic control system and the computer control system for users' selection.
5. Commonly used steam pressure 0.02-0.08 Mpa(0.2-8kg/cm2)
6. If using the electrical heating and being type one, the calculation is 15kw, and the practical use is 5-8kw/h.
7. The special requirements should be indicated at the time of order.
8. The price for the non-standard oven should be consulted.
9. The use temperatures more than 140°C and less than 60°C should be indicated at the time of order.

Feature

1. The  hot air dryer machine can realize closed circulation drying of low temperature air and good drying quality of materials.
2. High efficiency and energy saving.
3. Convenient temperature and humidity control.
4. Useful volatile components in recyclable materials.
5. Environment friendly.
6.The  hot air dryer machine can realize multiple functions.
7.The hot air dryer machine is widely used in materials.
8. Compared with other low-temperature drying devices (such as microwave drying, vacuum drying, freeze-drying), the hot air dryer machine has obvious economy because of its small initial investment and low operating cost.